================================
FS2002 Boeing 737NG panel
================================
Hello !
Thank you for downloading.
----------------
Installation
----------------
Instructions:
1) Extract the panel bitmaps and the panel config file to the Boeing panel folder.
2) Extract al files in the gauges zip file into the FS2002 gauges folder, overwrite any duplicate file.
3) Start FS2002 and enjoy your flight!
Optimised to work in 1024*768
Panel created with FS Panel Studio.
"You have to adjust th qnh on the emergency tool on the left of the rose heading.
This panel uses fsnav.So, you can switch the flying mode on radial mode or on fsnav waypoint mode.
The efis runs with two modes.
To tip-up switch on multi-digital-tools mode, you have to click on the sim icon of the clock or on SHIFT +5.
Finally, the little green beneath(under) the lever enables you to
bring back the depth trim to the value zero, instantaneously.
This panel was gathered in an optimum way for the IVAO fly network or SATCO fly network.
I hope you will enjoy flying with it.
------------------
Warning !!!!
------------------
Selling these files without author's agreement is prohibited.
Copyright and Distibution
=========================
This gauges are released as Freeware.
Copyright(C) Peter Beddig . All rights reserved.
The use of this software is at your own risk,
the author cannot be held responsable.
By Peter Beddig (P.Beddig@t-online.de)
If one of the gauges causes you any kind of problem concerning its use
please contact me and I will modify the panel as soon as possible."
